The AS3 Performance Factory Series front brake and clutch levers are top - notch on the market. They're made from lightweight, high - strength aluminium. These levers have a flexible pivot design, so on impact, they bend outwards instead of snapping or bending. You can adjust the reach of both levers to your preference. The clutch assembly replaces the whole OEM perch and has a 'quick adjust' clutch cable adjuster, allowing easy in - ride adjustment of clutch cable responsiveness. The clutch perch clamp comes with 2 smooth plastic inserts to prevent damage on impact by making the perch rotate. There are also 2 rubber boots on the clutch assembly to keep out dirt and debris. These levers fit various Honda models like CR 80 (1998 - 2002), CR 85 (2003 - 2007), CRF 150 (2007 - 2025), CR 125 (1992 - 2008), CR 250 (1992 - 2008), CRF 250 (2004 - 2018), and CRF 450 (2002 - 2018). The brake lever is a 105mm 3 - finger design, and the clutch lever is a 135mm 4 - finger design. They are standard - fitting, no modifications needed, and come with a 12 - month manufacturing guarantee. You'll get the exact levers as shown in the picture, and they're from a UK company based in the north of England.
Using these levers is a breeze. First, install them as they are standard - fitting, so no modifications are required. When you're riding, you can adjust the reach of the brake and clutch levers to your preferred distance from the bars. To adjust the clutch cable responsiveness, use the 'quick adjust' clutch cable adjuster on the clutch assembly. As for maintenance, regularly check the plastic inserts on the clutch perch clamp. If they're worn, replace them to prevent damage to the assembly. Also, keep an eye on the rubber boots on the clutch assembly and clean them if they get dirty. This will help keep dirt and debris out. Remember, these levers are made to be flexible on impact, but don't deliberately test their limits. And if you have any issues, the 12 - month manufacturing guarantee has you covered.
